LeadChem Technical enquiry

Engineering resources

Adhesive selection for soft-touch rigid boxes

Distinguish a soft-touch coating from a laminated soft-touch film, then identify which side meets the adhesive. The external tactile finish and the wrap-to-board bond need separate acceptance checks.

Which cold-glue series is intended for automatic rigid-box making?

M-6123, M-6192, M-6296, M-6298, M-6318 and M-6328 are rigid-box candidates for laminated stock, gold/silver board, soft-touch film, water-based varnish and specialty paper. The stated series values are 55±2% solids, 800–5,000 mPa·s and a 48-hour cure reference. Feeding may use a diaphragm pump or hopper, subject to machine and grade confirmation.

Separate the tactile finish from the bond
CandidateStated referenceSelection role
M-6123 / M-6192 / M-629655±2% solids; 800–5,000 mPa·sRigid-box cold glue; exact grade differences require TDS review
M-6298 / M-6318 / M-6328Same stated series range; 48 h cure referenceValidate pump/hopper delivery and actual wrap-to-board joint
LK103350±5 s; cup unspecified; solids by gradeWater-based soft-touch varnish; a finish, not a box-making adhesive

How do soft-touch film and soft-touch varnish change the trial?

LK1033 supplies a water-based tactile finish, while the M-6123–M-6328 family supplies the rigid-box bond. A film-laminated wrap introduces a different layer structure from varnished paper. Test the actual glue-contact face, turn-ins and corners rather than inferring bond compatibility from the feel of the visible outer surface.

Mark the printed side, film or coating layer, paper reverse and greyboard. A corner lift, trapped bubble and bowed lid may require different checks. Compare adhesive application, time before wrapping and pressing sequence on the same board batch. Record board and wrap dimensions so changes in construction are not mistaken for grade differences.

Which fiber-tear and thermal references apply to rigid boxes?

The rigid-box series states at least 95% fiber tear, with the ambient QC reference using 24 hours at 5–35°C and zero opening. Its thermal exposures are −36°C for 24 hours and 80°C for 48 hours at 95% RH. These conditions are test references, not a continuous-use rating for a finished box.

Inspect flat panels, wrapped edges and corners separately after the agreed conditioning. The series also states a 48-hour cure reference; record this separately from the 24-hour inspection. Photograph the separated bond faces, identify any film separation or board-layer failure and retain a control box made with the current adhesive.

Which details should accompany a soft-touch rigid-box enquiry?

Send the complete wrap-to-board construction, pump or hopper setup, machine sequence and required appearance or bond test. Name the proposed M-series grade, or LK1033 if the question concerns a coating rather than adhesive. Specify whether 95% fiber tear, thermal exposure, corner lift or panel flatness is the trial’s acceptance target.

  • Identify soft-touch film versus varnish and the adhesive-contact face.
  • Give greyboard thickness, box dimensions, feeding method and production timing.
  • Include photos at forming and after conditioning, with a control sample.
  • Request current TDS/SDS and specify destination, sample need and 20/50/1000 kg packaging.